Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Parts you may need for this application
ITEM
DESCRIPITON
1
1-1/4in. Brass Foot Valve
2
1-1/4in. PVC MPT x S Male Adapter
3
4
1-1/4in. PVC TEE FPT x FPT x FPT
5
1-1/4in. PVC Slip x Slip Union
6
3/4in. CPVC CTC Socket Tee Fitting
7
3/4in. PVC 90-Degress S x S Elbow
8
1in. PVC 90-Degress S x S Elbow
9
1in. x 3/4in. PVC Reducing Male Adapter
NOTE: Parts you may need for installing standard tank refer to section of Standard TanK (CONVENTIONAL
TYPE) Connection
Pre-INSTALLATION
Only for model# WPS05002TK
For Professional Technical Support call 1-844-242-2475
Screen
QTY
ITEM
1
10
3/4in. PVC MPT x S Male Adapter
4
11
3/4in. PVC Slip x Slip Union
1
12
1
13
1
14
1
15
1
16
1in. Discharge Priming Tee
1
17
1in. MIP x 3/4in. FIP PVC Bushing Fitting
1
18
1. Connect pump to pressure tank
Wrap discharge tee with thread tape (sold separately)
and thread it into pump outlet.
Thread flat washer onto bolt and attach pump to tank.
Secure bolt with another flat washer, spring washer, and
nut. Repeat this on the other side of the pump.
2. Connect braided hose to pump
Insert one of rubber washer into open end of the nut,
thread the nut into discharge tee. Hand tighten, and then
tighten with wrench 1/2 turn.
Insert rubber washer into another open end of the
stainless steel braided hose, thread hose into front of
tank. Hand tighten, and then tighten with wrench 1/2 turn.
DESCRIPITON
1-1/4in. Galvanized Plug
1-1/4in. PVC rigid Pipe
1in. PVC rigid Pipe
3/4in. PVC rigid Pipe
20 Gal. or larger Tank
QTY
2
1
1
some
some
some
1
1
1
7
Publicidad
Tabla de contenido
Solución de problemas
