Important Safety Instructions; Special Rules For Charger; Proposition 65; Symbols On The Machine - GreenWorks 29972 Manual Del Operador

Ocultar thumbs Ver también para 29972:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
1
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS - DANGER: TO
REDUCE RISK OF FIRE OR ELECTRICAL SHOCK
CAREFULLY OBEY THESE INSTRUCTIONS.
Confirm the voltage available at each country location
before using the charger.
If the sharp of the plug does not fit the power outlet, use
an attachment plug adaptor of the proper configuration
for the power outlet.
DO NOT probe the charger with conductive materials.
DO NOT allow liquid inside the charger.
DO NOT try to use the charger for any other purpose than
what is presented in this manual.
Unplug the charger before cleaning and when there is no
battery pack in the charger.
Do not try to connect two chargers together.
Do not use the charger in the circumstances that the
output Polarity does not match the load polarity.
For indoor use only.
The cover may under no circumstances be opened. If the
cover is damaged, then the charger may no longer be
used.
Do not recharge non-rechargeable batteries.
To avoid risk of fire, electrical shock, or electrocution:
Do not use a damp cloth or detergent on the battery or
battery charger.
Always remove the battery pack before cleaning,
inspecting, or performing any maintenance on the tool.
2
SPECIAL RULES FOR
CHARGER
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
WARNING
CAUTION
English
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or television reception, The reception
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
3

PROPOSITION 65

This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
Lead from lead-based paints;
Crystalline silica from bricks and cement and other
masonry products;
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
4

SYMBOLS ON THE MACHINE

You can use below symbols on the machine. Please study
them and learn their definitions. Correct interpretation of
these symbols let you operate the tool better and safer.
Symbol
4
NOTE
WARNING
Explanation
Class II

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cag801290310229862Cag812Cag817

Tabla de contenido