Assembly Instructions Rp729X; How To Use - Mopedia RP729M-L Manual De Instrucciones

6

10. ASSEMBLY INSTRUCTIONS RP729X

Parts list
1. Main Frame (1pc)
2. Legs (2pcs)
3. Bent tube (1pc)
4. Assembly Kit (1pc)
a. Open the assembly kit and
start the assembly taking the main frame (1)
b. Assemble on the main frame (1) : the legs (2), the saddle washers (f) and the short
screws (c). Do not tighten completely the screws.
c. Assemble on the front side of the main frame (1): the bent tube (2) with saddle washers (g),
the long screws (d), nuts and washers (e). Do not tighten completely the screws.
d. Assemble on the main frame (1): the bent tube (2) with the saddle washers (f) and the short
screws (c). Do not tighten completely the screws.
e. Tighten all screws, the walker is now ready to use. (Look the picture below)

11. HOW TO USE

Note: Refer to the safety instructions in this manual. Use the walker as aid device for walking.
To do this use the two handles and push forward the aid thus obtaining a support convenient
and reliable for walking.