Layout And Items Supplied; Proper Use - EINHELL GE-CR 30 Li Solo Manual De Instrucciones

vibrations, switch it off immediately and check
it.
Maintenance and storage
•
Make sure that all nuts, bolts and screws are
tightened securely at all times to ensure that
the machine is in safe working condition.
•
Allow the engine to cool down before you put
the machine in an enclosed area.
•
For safety reasons, replace worn or damaged
parts.
•
Always switch the machine off and unplug the
safety plug before making any adjustments or
cleaning it.
•
Switch off the engine and pull the safety plug
out:
- before you dislodge any blockages or clogs,
- before you clean the machine, inspect it or
carry out work on the machine,
- after you have traveled over an obstacle.
- If you have struck a foreign object.
- if the equipment begins to experience ex-
ceptionally strong vibrations
•
Do not touch the blades before the blades
have come to a complete stop and the safety
plug has been pulled out.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Top push bar
2. Bottom push bar
3. Motor unit
4. Hoe blades
5. Cable strain-relief clamp
6. Two-hand safety switch
7. Cable securing clips
8. Star nut (4x)
9. Screw (4x)
10. Transport wheel (2x)
11. Wheel cap (2x)
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
Anleitung_GE_CR_30_Li_Solo_SPK8.indb 26 Anleitung_GE_CR_30_Li_Solo_SPK8.indb 26
GB
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Engine unit
•
Lower push bar
•
Top push bar
•
Cable strain-relief clip
•
Cable securing clip (2x)
•
Star nut (4x)
•
Screw (4x)
•
Transport wheel (2x)
•
Wheel cap (2x)
•
Original operating instructions

3. Proper use

The machine is designed for digging soil (for
example garden beds). Be sure to observe the
restrictions in the safety instructions.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the machine is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
For safety reasons, the machine may not be used
as a drive unit for other work tools or tool sets of
any kind.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
- 26 -
02.08.2017 11:30:40 02.08.2017 11:30:40