Charging Time - Tineco FLOOR ONE S3 Serie Manual De Uso

Runtime
• When in AUTO mode, the runtime is approximately 35 minutes. When MAX power is used, the
runtime is approximately 25 minutes.
• Estimated runtime data was obtained by a Tineco Laboratory.

Charging Time

• A full charge takes approximately 4-5 hours.
• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Battery level ≥ 10%: battery indicator will be illuminated.
Battery level < 10%: battery indicator will be blinking.
Off: no power detected or possible battery malfunction.
Blinking red: dirt sensor malfunction or blocked.
Indicator blinking: CWT is empty.
Indicator blinking: DWT is full or channel has a blockage.
Indicator blinking: brush roller is not installed or has a blockage.
Illuminated: WiFi has successfully connected.
13