Interface Installation - OHAUS i-DT61XWE Manual De Instrucciones

EN-2

INTERFACE INSTALLATION

CAUTION: THE INSTALLATION AND WIRE CONNECTIONS TO THE
DISCRETE I/O BOARD SHOULD ONLY BE PERFORMED BY
AUTHORIZED AND QUALIFIED PERSONNEL, SUCH AS AN
ELECTRICIAN.
WARNING: BEFORE MAKING CONNECTIONS TO THE RELAY
TERMINALS, POWER OFF THE SYSTEM AND REMOVE ALL
EXTERNAL AC POWER CONNECTIONS.
WARNING: WHEN MAKING ANY LINE VOLTAGE CONNECTIONS
TO THE DISCRETE I/O, FOLLOW NATIONAL ELECTRICAL CODE
(NEC) OR LOCAL AUTHORITY WIRING STANDARDS AND SAFETY
PRACTICES.
1. Remove the four hex head bolts.
2. Pull out the bottom of the indicator, and remove the following circled M16
cover.