Removable internal sections
1
left-hand side inner plate
2
right-hand side inner plate
3
baffle plate
centre bottom of the fire
4
compartment
5
bottom fire basket
6
top fire basket
7
left-hand rear inner plate
8
centre rear inner plate
9
right-hand rear inner plate not for Vintage 30
left-hand bottom of the fire
10
compartment
rear bottom of the fire
11
compartment
right-hand bottom of the
12
fire compartment
13 ash removal port
3. Remove the ashtray.
Please note: the Vintage 30 does not have an
ashtray.
4. Install the adjustable feet under the legs, see
figure. When used on a slippery floor surface, it is
recommended that a rubber mat is used under the
legs.
8
Installation
not for Vintage 30
not for Vintage 30
not for Vintage 30
not for Vintage 30
not for Vintage 30
not for Vintage 30
not for Vintage 30
Door lock
The appliance is supplied with the latch button
installed. You could decide to use the latch button as
a "cold hand".
1. Loosen nut (2) slightly and loosen the set screw
(3) until the latch button is released.
2. Re-tighten nut (2).
3. Install the latch retainer on the base, see figure.
Subject to change because of technical improvements