KTM 90108904044 Manual Del Usario página 10

A
3
10
3
2
1
4 6
4 5
8
11
12
9
12
10
- Expose the wiring harness sleeve at position (A) and spread the cables so
that they are not pinched when the speedometer bracket and headlight
bracket are mounted.
- Position the preassembled speedometer bracket onto the triple clamp and
mount using the original bushings (1), cap head screws M6x25 (2)
(included), and nuts M6 (3) (included).
- Reconnect all plug-in connections.
Route the cable neatly and without bends and tie it with cable binders. Ensure
that the handlebar can turn all the way.
- Mount the range change metal nut M5 (included).
- Mount the cable sleeve (4) (included), threaded bushing (5) (included),
and headlight bushings (6) (included).
- Mount the turn signal mounting piece (7) using the Torx hexagon socket
screws M5x10 (8) (included) on the left and right.
- Mount the turn signal with the original nuts on the left and right.
- Fasten the metal brace for the speedometer bracket (9) (included), the
right cover (10) (included), and the left cover (11) (included) using the
Torx hexagon socket screws M5x10 (12) (included).