KTM 90108904044 Manual Del Usario página 9

1
1
3
5
6
9
8
7
7
9
11
10
- Remove the screws (1) and cable binder.
- Thread the wiring harness through the headlight bracket (2) and remove
the bracket.
1
2
1
- Remove the turn signal (3) and wind shield (4).
3
- Remove the speedometer (5) from the original bracket (6).
4
- Remove the rubber sleeve (7) from the original speedometer bracket and
mount it on the new speedometer bracket (8) (included).
- Mount the range change metal nut M5 (9) (included).
9
7
- Mount the metal brace for the speedometer bracket (10) (included) onto
the speedometer bracket (12) (included) using the Torx screws M5x10 (11)
(included), washers A5.3, and nuts M5 (included).
12
- Mount the original speedometer onto the preassembled speedometer
bracket using the original EJOT PT screws and washers.
9