Cleaning & Maintenance - Nostalgia Products SCC399CKTP Instrucciones Y Recetas

CLEANING & MAINTENANCE
1. Make sure the Power Switch is turned to OFF and power cord is
unplugged from the electrical outlet before cleaning.
2. Open the door on the Main Unit to clean and dry the interior
using a slightly damp, non-abrasive cloth or sponge.
3. Wipe the outside of the unit using a slightly damp, non-abrasive
cloth or sponge, then dry with a non-abrasive towel.
4. The shaving unit and clear lid are dishwasher safe. To take out the shaving
unit, refer to steps under REMOVING & REPLACING THE BLADE.
REMOVING & REPLACING THE BLADE
Over time, the ice shaving Blade will dull and should be replaced. Follow these steps to
replace your dull Blade. Additional blades can be ordered directly from the manufacturer.
CAUTION! Blade is VERY sharp. Use EXTREME CAUTION when handling.
Removing the Blade
1. Remove the Ice Tray and insert the Disassembly Tool (K) over the three arms of the Spinner.
2. Once the Disassembly Tool is properly inserted, twist counterclockwise (as the arrow shows)
and lift out the Spinner.
Blade
Blade
Housing
Ice
Tray
Blade Spinner
Cap
Disassembly
Tool
8