Dash Disassembly - Metra 99-6518B Instrucciones De Instalación

1. Remove liner inside tray at
the top center of the dash and
remove (2) torx screws. (Figure
A)
2. Unsnap and remove radio panel.
(Figure B)
3. Remove four screws and remove
radio. (Figure C)
4. The factory rear support will
need to be cut or removed to
allow space for a new radio. The
bottom section can be removed
with two cuts at the bottom
corners. (Figure D)
Continue to kit assembly

Dash Disassembly

Ram
(without a 8.4 inch touchscreen)
(Figure A)
99-6518B
2013-up
(Figure B)
5
(Figure C)
Remove shaded area
(Figure D)