Kit Assembly - Metra 99-6518B Instrucciones De Instalación

ISO DIN radio provision
Note: For proper orientation, the
locating tabs on the radio housing are
more to the top of the kit than bottom.
(Figure A)
1. Rotate the brackets into the radio
housing. (Figure B)
2. Mount the Pocket inside the
brackets using the supplied
#8 x 3/8" screws. (Figure C)
3. Slide the radio into the bracket/
pocket/ radio housing assembly
and secure using the screws
supplied with the radio. (Figure D)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

Top of housing
(Figure A)
(Figure B)
99-6518B
(Figure C)
(Figure D)
6