OPERATION
DANGER:
Never cut near power lines, electric cords, or other electric sources.
If the blades jam on any electrical cord or line, DO NOT TOUCH THE BLADE OR THE
ALUMINUM POLE! THEY CAN BECOME ELECTRICALLY LIVE AND MAY BE VERY
DANGEROUS. Continue to hold the pole saw attachment by the insulated handle or lay
it down and away from you in a safe manner. Disconnect the electrical service to the
damaged line or cord before attempting to free the blade from the line or cord. Contact
with the blade, other conductive parts of the pole saw attachment, or live electric cords
or lines will result in death by electrocution or serious injury.
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
marked to comply with ANSI Z87.1. Failure to do so could result in objects being
thrown into your eyes and other possible serious injuries.
WARNING:
by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for the purposes listed below:
◾
Limbing
◾
Pruning
Do not allow familiarity with this product to make you careless.
Always wear safety goggles or safety glasses with side shield
Do not use any attachments or accessories not recommended
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
17