EGO PSX2500 Manual Del Operador página 35

Ocultar thumbs Ver también para PSX2500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
CAUSE
Pole saw
does not cut
properly.
Bar and chain
running hot
and smoking.
Dry or excessively stretched
chain.
Chain not in bar groove.
Check chain tension for over
tightened condition.
Chain oil tank is empty.
Debris in guide bar groove.
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
SOLUTION
Check the oil level. Refill the oil tank if
necessary.
Remove the battery pack and reinstall
the saw chain, following the section
"REPLACING THE BAR AND CHAIN".
Remove the battery pack and re-
tension the saw chain, referring to
the section "ADJUSTING THE CHAIN
TENSION".
Fill the oil tank with bar and chain
lubricant.
Clear the debris in the groove.
35

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Psx2500-fc

Tabla de contenido