EGO PSX2500 Manual Del Operador página 23

◾
Always clean out wood chips, saw
dust, and dirt from the guide bar
groove when replacing the saw
chain.
◾
Please examine the motor housing
inside from the cooling vents and
clear the debris every two weeks
(Fig. 8).
NOTICE:
Do not use any strong
detergents on the plastic housing or the
handle. They can be damaged by certain aromatic oils such as pine and lemon.
REPLACING THE BAR AND CHAIN
WARNING:
pack is removed. Failure to heed this warning could result in serious personal injury.
WARNING:
components are sharp and may contain burrs.
WARNING:
saw chain is very sharp; always wear protective gloves when performing maintenance
to the chain.
NOTICE:
When replacing the guide bar and chain, always use the specified bar
and chain combination listed in the "Recommended Bar and Chain for this Pole
Saw"section.
Before performing any maintenance, make sure that the battery
Always wear gloves when handling the bar and chain; these
Never touch or adjust the chain while the motor is running. The
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
8
23