Maintenance; General Maintenance - EGO PSX2500 Manual Del Operador

MAINTENANCE

WARNING:
any other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
power pole before inspecting, cleaning, performing maintenance or changing add-on
attachments.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
Maintain Appliance With Care – Keep cutting edge sharp and clean for best
performance and to reduce the risk of injury. Follow instructions for lubricating and
changing accessories. Inspect appliance cord periodically, and if damaged, have it
repaired by an authorized service facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean, and free from oil and grease.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which can result in serious personal injury.
WARNING:
water or other liquids.
All pole saw service, other than the items listed in this manual, should be performed by
a qualified service technician.
CLEANING
◾
After each use, remove the battery and clean debris from the chain and guide bar
with a soft brush. Wipe the pole saw surface with a clean cloth moistened with a
mild soap solution.
◾
For deep cleaning, remove the chain-sprocket cover, and then use a soft brush
to remove debris from the guide bar, saw chain, sprocket, chain-sprocket cover.
Remove the chain-sprocket cover and then use a soft brush to remove debris
from the chain sprocket and the cover.
22
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
When servicing, use only EGO genuine replacement parts. Use of
To prevent serious personal injury, remove the battery pack from the
Do not at any time let brake fluids, gasoline, petroleum-based
When cleaning the pole saw attachment, DO NOT immerse it in