Hunter 90121A Manual Del Propietário página 5

NOTE: Assembly of this fan will be
easier if performed by two people.
1. Loosen the Height Adjustment
Grip on the Telescoping Pole
by turning it counterclockwise.
See Figure 3. note: To prevent
the plug from dropping into the
Telescoping Pole, grasp the plug
before you raise the Telescoping
Pole. Raise Telescoping Pole ap-
proximately 10 inches. Turn the
Height Adjustment Grip clock-
wise to set the height of the
Telescoping Pole.
2. Remove the Motor Mount Set-
screw (pre-loaded and tagged)
and set it aside for later reinstal-
lation. See Figure 3.
3. Connect the plugs coming from
the bottom of the Motor Mount
and the top of the Telescoping
Pole. See Figure 4.
41973-01 03/08/2006
aSSembly
FIGURE 3
FIGURE 4
fan
Motor
Motor
face

continued