Troubleshooting - Hunter 90121A Manual Del Propietário

Storage
1. To store the fan, disassemble
the Front and Back Grilles,
remove the Blade Assembly,
and clean the entire fan with a
damp cloth.
2. ALWAYS store the fan in a dry
place.
3. NEVER store the fan while it is
still plugged in.
4. NEVER wrap the cord tightly
around the fan.
5. DO NOT put any stress on the
cord where it enters the fan, as
it could cause the cord to break.
1

troubleShootIng

PROBLEM
• Fan will not work.
SOLUTION
• Make sure the interlock switch
is properly installed as directed
in the assembly instructions. (see
page 9)
PROBLEM
• Fan will not oscillate.
SOLUTION
• Push down on knob on top of mo-
tor housing to activate oscillation.
(see page 10)
PROBLEM
• Can not adjust the
angle of the fan.
SOLUTION
• Loosen the screw on the side of
the fan neck. Adjust to the desired
angle and tighten the screw. (see
page 10)
If you have tried these trouble-
shooting solutions and still have
trouble, visit our Web site at
http://www.hunterfan.com.
HUNTER FAN COMPANY
2500 FRISCO AVENUE
®
MEMPHIS, TN 38114, USA
Printed in China
41973-01 03/08/2006