7 MAINTENANCE
Maintenance must be carried out at regular intervals by qualified personnel in compliance with the provisions of statutory legislation
and the regulations in force. RAMPART must be serviced at least once every 6 months or after 10.000 operating cycles since the
last service.
• Disconnect the operator from all power supplies.
• Check all the moving parts and replace any worn parts.
• Check all parts of the automation system for signs of deterioration.
8 SPARE PARTS
Spare parts can be purchased by contacting technical service.
9 DISPOSAL
At the end of its useful life the automation system must be dismantled by qualified personnel and the materials must be recycled or
disposed of in compliance with the local legislation in force.
24
COMUNELLO ®Copyright 2021 - All rights reserved