Pressure Relief Therapy; Reduced Heel Area Pressure; Instaflate ™ Function; Touch Screen Interface - arjo TheraKair Visio Manual Del Usuario

Pressure Relief Therapy

The system provides pressure relief therapy, which significantly reduces interface pressures when compared
to a standard hospital bed mattress.

Reduced Heel Area Pressure

The cushions at the foot of the bed operate at a lower pressure level, which reduces heel area interface
pressures. The cushion corresponding to the heel of the patient may also be removed to further reduce heel
area pressure.
InstaFlate Function
™
The system is programmed with an InstaFlate function. When this function is activated through the control
screen interface, the mattress will rapidly inflate to maximum firmness. This allows easy patient transfer and
repositioning.

Touch Screen Interface

The TheraKair Visio MRS is controlled via a touch screen interface that gives details of system status and
allows for easy and precise adjustment.

Individualized Patient Support

The TheraKair Visio MRS is made up of fifteen air cushions that run over the width of the mattress. The
pressures within the cushions are automatically controlled at the therapy unit and can be adjusted to
accommodate the weight and body shape of each patient, facilitating pulsation therapy and pressure relief
therapy.

Quick Release Air Supply Connector

The air connection between the mattress and the therapy unit can be quickly and easily disconnected in the
event that CPR (cardiopulmonary resuscitation) is required for the patient. When disconnected, the mattress
will rapidly deflate and the therapy unit will go into standby mode.
It will take approximately 10 seconds for the mattress to deflate sufficiently for CPR to commence.

Warmer

A warmer is incorporated into the therapy unit to allow adjustment of air temperatures entering the
mattress and to help increase patient comfort.

Reusability

The TheraKair Visio MRS is reusable after proper care and cleaning. Minor leaks and holes caused by needle
and pin pricks will not prevent reuse or cause deflation.
10