Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Use Optional
Spacer if Needed
Figure 5
Helpful Videos – www.hzsupport.com
• Screw Mounting: Remove back of case
by pushing in tab on bottom with a small
screwdriver (see Figure 2). Note: Remove
material in screw holes (if needed) before
mounting with screws. Attach sensor back
cover to wall using two short screws (see
Figure 5). Snap sensor onto back cover.
• Tape Mounting: Apply foam tape to the
sensor back cover. Stick sensor back cover
to frame of door in desired position. Snap
sensor onto back cover.
6. Mount magnet. Repeat step 5 to attach
magnet (and spacer if needed) to door using
two screws (provided). Note: If using spacer,
use the two long screws (provided).
Helpful Answers – 1-800-858-8501
3
Publicidad
Tabla de contenido
