Corrective Action - Heath Zenith 7368 Manual Del Usuario

6
3. PROBLEM: Chime sounds when not intended (false triggers).
POSSIBLE CAUSE: Chime is receiving interference from another wire-
less device.
CORRECTIVE ACTION: Reset chime.
• Unplug chime.
• Ensure switch 1 on both the chime and sensor is set to OFF.
• Wait 30 seconds.
• Press and hold the "TEST" button inside the sensor within 20 seconds
after plugging in chime. When the "Ding" tune is played, the chime
memory has been erased.
• To re-sync the sensor and chime, unplug chime. Wait 30 seconds.
• Press and hold the "TEST" button inside the sensor within 20 seconds
after plugging in chime. When the "Ding-Dong" tune is played, the sen-
sor is synced with the chime.
Note: The sensor and chime come synced from the factory. The range of the
wireless chime can vary with location, temperature, and battery condition.
Helpful Videos – www.hzsupport.com Helpful Answers – 1-800-858-8501