Setting Up The System - Denon AVR-1604 Instrucciones De Operación

ENGLISH
10

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see
pages 6 to 9), make the various settings described below on the display.
These settings are required to set up the listening room's AV system centered around the this unit.
1
Set the slide switch to "AUDIO".
2
Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your
system and their corresponding sizes (SMALL
Speaker for regular speakers, LARGE for full-size, full-
Configuration range) to automatically set the composition of
the signals output from the speakers and the
frequency response.
Subwoofer This selects the subwoofer speaker for playing
Mode deep bass signals.
Set the frequency (Hz) below which the bass
Crossover
sound of the various speakers is to be output
Frequency
from the subwoofer.
This parameter is for optimizing the timing with
which the audio signals are produced from the
Delay Time
speakers and subwoofer according to the
listening position.
This adjusts the volume of the signals output
from the speakers and subwoofer for the
Test Tone
different channels in order to obtain optimum
effects.
Digital In This assigns the digital input jacks
Assignment for the different input sources.
Auto Surround
Auto surround mode function setting.
Mode
Ext. In SW
Set the Ext. In Subwoofer channel playback level.
Level
NOTE:
• The system setup is not displayed when "HEADPHONE ONLY" is selected.
10
All manuals and user guides at all-guides.com
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons (•, ª, 0, 1)
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Default settings
Center Surround Surround
Front Sp.
Sp. Sp. Back Sp.
Large Small Small Small
Subwoofer mode = Normal
80 Hz
Front Front Surround Surround Surround
Center
L R L R
3.6 m 3.6 m 3.6 m 3.0 m 3.0 m
Front Front Surround Surround Surround
Center
L R L R
0 dB 0 dB 0 dB 0 dB 0 dB
Input
COAXIAL OPTICAL 1 OPTICAL 2
source
Digital
CD DVD/VDP TV/DBS
Inputs
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
Before setting up the system
1
(Main unit)
2
3
NOTE:
• Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time.
The changes to the settings made up to that point are entered.
Setting the speaker configuration
1
Subwoofer
Yes
Subwoofer
Back
2
3.0 m 3.6 m
Subwoofer
Back
0 dB 0 dB
NOTE:
• When "Small" has been selected for the front speakers, "Large" cannot be selected for the center speaker.
Check that all the components are correct, then press the POWER operation
switch on the main unit to turn on the power.
Press the SYSTEM SETUP button to enter the setting.
*SYSTEM SET UP
NOTE: Please make sure the "AUDIO" position of the slide switch on the remote
control unit.
Press the ENTER or (down) button to switch to the speaker configuration
set up.
Use the (left) and (right) buttons to select your front speaker type.
(Initial)
LARGE
1 FRONT LARGE
(left) button (right) button
Press the ENTER or (down) button to switch to the center speaker setting.
Use the (left) and (right) buttons to select your center speaker type.
LARGE SMALL
2 CENTER SMALL
(left) button (right) button
Press the ENTER or (down) button to switch to the surround speaker setting.
SMALL
(Initial)
NONE