Operation; Before Operating - Denon AVR-1604 Instrucciones De Operación

Punch Through
• "Punch Through" is a function allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO SEARCH
buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV mode. By
default, nothing is set.
1
Set mode switch 1 to "VIDEO".
2
Set mode switch 2 to the component to be
registered (DBS/CABLE or TV).
3
Press the DVD/VDP power button and the TV
power button at the same time.
• Indicator flash.
4
Input the number of the
1 2 3
component you want to
4 5 6
set. (See Table 1)
7 8 9
0
Table 1
No.
CD 1
TAPE 2
CDR/MD 3
DVD/VDP 4
VCR 5
No setting 0
All manuals and user guides at all-guides.com
12

Before operating

3 3
4
1
2

OPERATION

1 2
1
2
ENGLISH
Preparations:
Check that all connections are proper.
1
Turn on the power.
Press the power operation switch (button).
ON/STANDBY
(Main unit) (Remote control unit)
• ON/STANDBY
¢
The power turns on and power indicator is lit.
Several seconds are required from the time
the power operation switch is set to the "
ON/STANDBY" position until sound is output.
This is due to the built-in muting circuit that
prevents noise when the power switch is
turned on and off.
Set the power operation switch to this
position to turn the power on and off from the
included remote control unit.
• £ OFF
The power turns off and power indicator is
off.
In this position, the power cannot be turned
on and off from the remote control unit.
2
Select the front speakers.
Press the SPEAKER A or B button to turn the
speaker on.
(Main unit) (Remote control unit)
• The front speaker A, B setting can be also be
changed with the SPEAKER button on the
remote control unit.
Light
¢
17