Qilive Q.6899 Manual Del Usuario página 10

not slip during the door reversing process. All parts removed must be saved to do the
EN
reinstallation of the door. Do not lay the appliance flat as this may damage the coolant
system. It is better that 2 people handle the appliance during assembly.
1. Remove the upper hinge cover, then remove the upper hinge after removing its three
screws ( Fig. 3).
Upper hinge cover
2. Remove the upper door.
3. Remove the center hinge after removing its two screws ( Fig. 4).
4. Remove the lower door.
5. Remove the lower hinge after removing four screws ( Fig. 5).
6. On the lower hinge, remove the hinge screw, and remove the hinge pin after removing
its washer and nut ( Fig. 6).
Fig. 5
On the lower hinge again, re-fix the hinge screw on its opposite side, and re-fix the
hinge pin with the washer and nut on its opposite side ( Fig. 7).
Hinge pin
Hinge screw
Washer
Nut
7. Install the lower hinge on the left side of the cabinet.
8. On the lower door, remove the door stop after loosening its screw on the bottom right,
then re-fix the door stop on the bottom left using the screw ( Fig. 8).
9. Install the lower door onto the lower hinge.
3 screws
Upper hinge
Fig. 3
Lower hinge
4 screws
Fig. 7
Fig. 4
Fig. 6
Lower door
Fig. 8
10
Upper door
Center hinge
2 screws
Hinge pin
Hinge screw
Washer
Nut
Door stop