Qilive Q.6899 Manual Del Usuario página 11

10. On the top of the lower door, remove the pin sleeve on the right and the screw hole
plug on the left, then re-fix both by reversing their location ( Fig. 9).
Screw hole plug
Pin sleeve
11. Remove the screw and the screw hole plug of the center hinge on the left side of the
cabinet, then re-fix both on the on right side of the cabinet ( Fig. 10).
12. Install the center hinge on the left side of the cabinet using two screws ( Fig. 11).
Upper door
Center hinge
Pin sleeve
2 screws
13. On the upper door, remove the door stop after loosening its screw on the bottom
right, then re-fix the door stop on the bottom left using the screw ( Fig. 12).
14. Install the upper door onto the center hinge.
15. On the top of the upper door, remove the pin sleeve on the right and the screw hole
plug on the left, then re-fix both by reversing their location ( Fig. 13).
Screw hole plug
Pin sleeve
16. Remove the upper hinge cover on the top left after removing its screw, then re-fix the
upper hinge cover on the top right using the screw ( Fig. 14).
17. Install the upper hinge on the top left with three screws while ensuring the top of the
door is level with the cabinet and the door gasket is correctly positioned. Finally fix
the upper hinge cover ( Fig. 15).
Fig. 9
Fig.11
Upper hinge cover
Fig.13
Upper hinge cover
3 screws
Upper hinge
Fig.10
Upper door
Fig.12
Screw
Fig.14
Fig.15
11
Screw
Screw hole plug
Door stop
EN