Fitting Your Mask - Roscoe Medical DreamEasy 2 Manual Del Usuario

FITTING YOUR MASK

DREAMEASY 2 FULL FACE MASK — STARTER KIT
NOTE:IfyouhavepurchasedasizespecificmaskandNOT
the starter kit, please skip to the next section.
1. Using the Full Face Mask Fitting Guide provided,
align your nose into the small, medium and large
cutouts. The correct size for you should align with
the top bridge of your nose down to your lower lip,
just between the lip and chin. The widest parts of
your nose and lips should not touch either side of the
cutout.
2. Once the cushion size has been determined, you can
proceedtofittingthemask.Themediumsealcomes
pre-attached to the mask. If that's the correct size,
you may skip to the next section.
3. To change the cushion to another size, simply hold
the mask shell with clean hands and gently pull the
Comfort Cushion off and set it aside.
4. Remove the desired size seal from its package and
hold it so the size indicator is on the bottom and facing
away from the mask shell. With the mask shell in your
other hand, align the three (3) notches (near each of
the three (3) corners) on the seal to the three ridges on
the shell. Gently push the seal onto the mask shell until
itisfirmlyattached.
DREAMEASY 2 FULL FACE MASK —
SIZE SPECIFIC
NOTE:
If you have purchased the starter kit and
sizespecificmask,pleasemakesureyoureadtheprevious
section before you proceed.
4
For your convenience, the headgear
and Comfort Cushion have already been
attached to the mask.
1. To put the mask on, unhook the
headgear clip from the lower left or
lower right side of the mask shell.
Full Face Mask Fitting Guide
Small Medium Large
NOT
a