CASUALPLAY Q-RETRAKTOR SAFE TECH FIX II Instructions página 33

belt, passing it through the belt guide on the headrest (Fig. 33). Check that the
abdominal section is positioned as low as possible and the diagonal part restrains
the child's chest (Fig. 34).
• Fasten the buckle, passing the male part through the side opening of the casing
(fig.35).
N.B.: To remove the seat do the same in reverse.
REMOVING THE UPHOLSTERY
• If necessary unfasten the harness.
• Move the headrest to the highest position.
• Remove the cover of the headrest, releasing the velcro fasteners and side
tabs
• Take the cover off the headrest, unfastening the elastic straps on the back.
• Release the two plastic pivots on the backrest (fig.36). Pull the cover to the
sides under the headrest.
• Undo the clasps and unfasten the elastic straps found on the armrests, on
the left and the right (fig.37-38).
• Pass the buckle through the upholstery.
• Lastly, pull the upholstery upwards.
FITTING THE UPHOLSTERY
• Follow the same steps as above in reverse order.
• Make sure that the harness straps pass correctly though the gaps in the
upholstery, and that they are not twisted.
MAINTENANCE
• Follow the washing instructions indicated on the different care labels on the
fabric parts.
• The plastic parts can be cleaned with a soapy solution, do not use abrasive
products.
33