Case Information Input Interface; Function Buttons - Gima ECG 300G Manual De Instrucciones

In current interface, press
Click "OK" to apply new setup and return to sampling interface; while click"Cancel" not to
apply and directly return to sampling interface.
The optional content of each setting item and its description are shown in the following
table:
Item
AC filter
EMG filter
DFT Filter
Rhythm Lead
Show Style
Show Gain
Show Speed

7.3 Case information input interface

Due to the difference of system setup (refer to 7.8), user could choose to input case
information (including number, name, pacing, etc.) before or after the sampling, or not input the
case information, the dialogue box is shown as below:
Archive information

Function buttons

Options
[ON]/[OFF]
[ON]/[OFF]
[ON]/[OFF]
Any lead among the 12 leads
[3 Leads]/[6Leads]/[12Leads]
[5mm/mV]/[10mm/mV]/[20mm/m
V]
[12.5mm/s]/[25mm/s]/[50mm/s]
to enter quick setup interface, shown as below:
Turn on or off the AC filter.
Turn on or off the EMG filter.
Turn on or off the Baseline filter.
Set the rhythm lead that used for
printing under rhythm mode
Set the display method of ECG.
Set the gain of displayed ECG.
Set the speed of displayed ECG.
21
Description