Date And Time Setup - Gima ECG 300G Manual De Instrucciones

In current interface, press
Click "OK" to apply new setup and return to review interface; while click"Cancel" not to
apply and directly return to review interface.
The optional content of each setting item and its description are shown in the following
table:
Item
Print Mode
Rhythm Lead
Show Style
Show Gain
Show Speed

7.7 Date and time setup

In the main interface, click
Options
[Auto 4×3]/[Auto 3×4]/[Auto 2×6], and
other print modes that applicable for
current case
Any lead among the 12 leads
[3 Leads]/[6Leads]/[12Leads]
[5mm/mV]/[10mm/mV]/[20mm/mV]
[12.5mm/s]/[25mm/s]/[50mm/s]
to enter the following interface to set date and time.
to enter quick setup interface, shown as below:
25
Description
The system takes the
selected option as print
mode.
Set the rhythm lead that used
for printing under rhythm
mode
Set the display method of
ECG.
Set the gain of displayed
ECG.
Set the speed of displayed
ECG.