How To Power Dc Appliances With This Product; How To Use The Flashlight - Westinghouse iGen200s Manual De Usuario

HOW TO POWER DC APPLIANCES WITH THIS PRODUCT

1. Connect the power cable plug of the electrical appliance to USB
outlets or 12V port.
2. Press the "DC Power ON/OFF" button to turn on. The button will
illuminate when it is on.
3. The LED Display will display real-time wattage of the appliance.
4. When finished, press "DC Power ON/OFF" to turn off DC power. (If
there is no DC power output for 30s the DC power will turn off.)
NOTICE: If the total output exceeds the wattage output of the DC outlet,
the power station will automatically shut off. Please ensure the power
consumption is less than what the outlet is rated for before using the device.
QUICK CHARGE OUTPUT: This product supports Type-A QC3.0 and
Type-C PD that output 5V/3A, 9V/2A, and 12V/1.5A, for smart devices. The
actual output voltage and current depend on the smart devices, it can be
obtained by consulting the smart device manufacturer.
12V 6MM OUTPUT: The device comes with a 12V cigarette lighter adapter
for 6mm port. This can output 9-12.6V DC, up to 10A. If you plan on using
the 6mm outlet without adapter please confirm whether your DC 12V
appliance supports charging with a 6mm DC plug (The diameter of the DC
port of the product is 6 mm).

HOW TO USE THE FLASHLIGHT

1. Press Flashlight ON/OFF button once to turn light on
2. Press button again to make light 50% brightness
3. Press a third time to turn light off
SOS MODE: While the light is on, hold down flashlight button for 3
seconds to activate SOS mode. Single press to turn SOS mode off.
WARNING: Do not look directly into the light. May cause damage due
to the strong light.
Westinghouse Outdoor Power Equipment - 10