SUOMY JUMPER Instrucciones Para Uso página 27

EN
USE AND MAINTENANCE
To clean the shell use water and mild soap; let the helmet dry at room temperature, never expose it to heat.
Cleaning the helmet with solvents, petrol by-products or chemical substances, applying stickers or painting the
helmet could affect the structure of the shell, thus affecting the safety features, even if the damage is not readily
visible. Do not apply stickers to, use petrol or other chemical solvents with this helmet.
When cleaning the removable fabric parts, hand wash with water at a low temperature using only mild soap.
Even if it is part of the helmet's removable elements, the fabric lining must never be immersed in water while it
is attached to the rigid or spongy inner padding.
In both cases, allow the treated parts to dry at room temperature away from sunlight and never expose them to
heat.
Periodically clean the restraint system with warm water and mild soap. Do not use solvents or chemical
detergents and do not lubricate.
All painted surfaces are subject to a natural alteration due to exposure to atmospherics; particularly some
colourings made with Fluo or UV paints could be subject to a faster migration phenomenon with a drop in
intensity. The phenomenon could be enhanced when the helmet is exposed for long periods to a particularly
intense light. Suomy therefore, cannot be held responsible for alterations of the painted surfaces due to wear
(effects of sunlight, vapors, detergents, crashes, scratches).
This does not jeopardize the performances and the quality of SUOMY JUMPER.
Suomy denies all responsibility if this occurs.