Add Engine Oil - Craftsman 580.752510 Instrucciones De Uso

.
Align hose wrap (A) to the back side of accessory tray.
Locate notch with "unlock" icon (B) on hose wrap.
Position notch at top with hose wrap in vertical position.
Clips in the back of accessory tray should slide into the
grooves on the inside surface of hose wrap. Slide hose
wrap on back of accessory tray and rotate 1/8 turn until
"locked" icon (C) is in vertical position. Hose wrap is
easily removed from the accessory tray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hose on the reel makes it easy to wrap the hose
while it is detachedfrom the accessory tray.
Attach ProjectPro@PerfectiVIW MSiphon to
Pump
Attach the hose end of the blue PerfectMix
TM
Siphon (G) to
the barbed hose fitting (H) on the pump.
Attach PerfectMW MDetergentSiphon to
Concentrate Bottle
Place PerfectMix
TM
bottle (not included) in the wire-form
bracket on the handle. Removecap from bottle and insert the
PerfectMix
TM
Siphon (6). Screw the siphon unit to the top of
the bottle (J). Use the clip on the cap (K) to snap siphon to
wire form bracket when siphon is not in a concentrate bottle.
.
Attach bottle bracket (D) to handle with carriage bolt (E)
and black plastic knob (F). Tighten by hand.
2-iN-1 Soap System
The pressure washer is equipped with two detergent
siphoning hoses.
Project Pro@ PerfectMWMSiphon
Blue tube with blue bottle cap:
When using the blue PerfectMix
TM
siphon, use
the PerfectMix
TM
Extreme Concentrate straight
from the bottle.
Standard Siphon Tube
Cleartube with filter:
When using the clear siphon tube, dilute
1 part PerfectlViix
TM
Extreme Concentrate
to 16 parts water (4 oz of concentrate
makes 1/2 gallon of mix.)
Add Engine Oil
1. Place pressure washer on a flat, level surface.
2. Cleanarea around oil fill and remove oil fill cap/dipstick.
3. Using oil funnel (optional), slowly pour contents of
supplied oil into oil fill opening, frequently checking oil
level. DO NOT OVERFILL.
NOTICE Improper treatment of pressure washer could
damage it and shorten its life.
• DO NOT attempt to crank or start the engine before it has been
properly serviced with the recommended oil. This could result in
an engine failure.
4. Replaceoil fill cap/dipstick and fully tighten.