Workstation - Leister WELDPLAST S6 Instrucciones De Funcionamiento

Operation
Work environment/Safety
The handheld extrusion welder may not be used in areas with explosion and/or ignition hazards.
Ensure a stable position during work. The connection cable and welding rod must be able to move
freely and must not hinder the user or third parties while working.
Place the handheld extrusion welder on a fireproof support! Hot metal parts and the warm air jet
must be kept at a sufficient distance from the support and walls.
Adjusting the handle
1. Turn the handle (6) anticlockwise to loosen the clamp
2. Turn the handle (6) to the desired working position
3. Turn the handle (6) clockwise to tighten the clamp

Workstation

If the welding work is interrupted, the drive must be
switched off with the on/off switch for drive (2).
Place the handheld extrusion welder on a
stable, fireproof support as shown in the
figure.
22
6