Service And Repair - Leister WELDPLAST S6 Instrucciones De Funcionamiento

Maintenance
• Check the power supply cord (14) and plug for electrical and mechanical damage.
• Every time the welding shoe is changed, clean the extruder nozzle (36) of welding residue.

Service and repair

• Repairs shall be assigned exclusively to authorized Leister Service centers. These guarantee a professional and
reliable repair service within 24 hours with original spare parts in accordance with circuit diagrams and spare
parts lists.
• If, after turning on the WELDPLAST S6, the service indicator display appears
with the message Service Code 1, the carbon level should be checked by
an authorized Leister Service center and the drive carbon brushes replaced
if necessary.
• The display can be hidden again by pressing the Select key (28)
• The handheld extrusion welder can be used again for a short time.
• If the carbon brushes are not replaced within a reasonable period of time,
the drive will run until it reaches the mechanical carbon stop. No error mes-
sage will appear on the display, but the drive will no longer start up.
Warranty
• The guarantee or warranty rights granted for this device by the direct distribution partner/salesman apply after
the date of purchase. In the event of a guarantee or warranty claim (verification by invoice or delivery note),
manufacturing or processing errors will be rectified by the sales partner through replacement delivery or repair.
Heating elements shall be excluded from warranty obligations or guarantees.
• Other guarantee or warranty claims are excluded within the framework of mandatory law.
• Damages resulting from natural wear, overload or improper handling are excluded from the warranty.
• No guarantee or warranty claims exist for devices that have been converted or modified by the purchaser.
We reserve the right to make technical changes
34
.