Leister WELDPLAST S6 Instrucciones De Funcionamiento página 30

Operation
Programming the welding parameters
Menu
Select program
Selection
Enter
The handheld extrusion welder is suitable for the following types of thermoplastic materials:
• PP/PE-HD/PE-LD
Programs 1 – 3 are preset with suitable values which can be adapted during the welding process.
The adjustments are not saved!
The free settings 1 – 4 are preset at the factory and can be programmed freely. The parameters will be stored even
after the device has been switched off.
Welding program
Free set. 1 – 4
Prg1 PE-LD
Prg2 PE-HD
Prg3 PP
The currently set welding program (17) is shown in the working display.
Setting the output volume
• Press the Select key (28) to move the cursor to the "SPEED" position.
• Set the output value (60 to 100) with the Up key (29) or the Down key (27).
Setting the PLAST and AIR temperatures
• Press the Select key (28) to move the cursor to the "PLAST" or "AIR" position.
• Set the temperature value with the Up key (29) or the Down key (27).
30
Setpoint PLAST [°C]
230
220
230
240
Free
setting
1-4
Setpoint AIR [°C]
260
260
260
260