GPE Vendors DRX Manual Tecnico página 50

TO MODIFY TEXTS AND SPOTS IN THE DRX MACHINES:
GB
• To modify texts and Spots in the DRX machines:
48
"Edit -> Texts"
Go onto the language to modify and modify the text, being careful
not to exceed the maximum length indicated in said fi le, under the
writing "LENGTH" which is found some lines above in the section
which is to be modifi ed.
• Having modifi ed and saved the language text fi le, go into the
menu: "Edit - convert all" (if the length of texts is wrong the
program will indicate an error on the line of text with the wrong
dimensions which is to be immediately corrected) If all proceeds
well, the programme generates a "text.bin" fi le in the "CUSTOM"
directory
• Connect the PC with an RS232 serial cable to the board of the
DRX, go into the programme "Tools - Update Texts" and position
onto the directory "CUSTOM" and select the fi le "text.bin", give
the OK to the transferring of data...the texts are now modifi ed in
the machine.
To send Spots to the machine, create a graphic fi le of the type
"bmp" of dimensions 128x64 pixels - black and white (no colour
or gray scale), with paint or another graphic programme. The
name of the fi le must be necessarily "spot_1.bmp", "spot_2.bmp"
etc...up to "spot_8.bmp" depending on the number of spots to
be inserted. The fi le created must be saved in the programme
directory RVM72A in the underdirectory "CUSTOM". Then go
into the menu "Edit - Convert all" and if there are no errors in
the format of the bitmap, all will conclude without any error
indication. Then connect the PC with an RS232 serial cable to
the board of the machine, enter the programme "Tools - Update
Graphics" and position onto the directory "CUSTOM" and select
the fi le "graphic.bin", give the OK to the transferring of data...the
spots are now modifi ed in the machine.