General Characteristics; Drx-Frozen Master - GPE Vendors DRX Manual Tecnico

GB

DRX-FROZEN MASTER

50

GENERAL CHARACTERISTICS

The DRX-FROZEN MASTER is an automatic distributor of frozen
products that works in an autonomous manner and was created
by a combination of machines of the DRX series and of the DRX-
FROZEN series.
The two electronic logic boards RVM72A and IMG2A present in the
machine unite the functionality of the DRX and the potential of the
chiller cell typical to the DRX-FROZEN.
The machine has two doors, one external and one internal.
The opening of the external door switches off the control logic
board of the chiller cell.
To work in safety it is necessary to turn off the main switch with
red light present on the control panel.
EXPANSION THROUGH CONNECTION TO A DRX-FROZEN
It is possible to expand the DRX-FROZEN MASTER connecting it
to a DRX-FROZEN. To carry out the connection, remove the grill
to the lower back where there is a small printed circuit FL 26-14
present with a 26 pin connector into which the cable from the
DRX-FROZEN must be inserted.
SET-UP OF THE THERMOSTAT TEMPERATURE
To set-up the thermostat temperature operate in the following
way:
• Press the SET button twice consecutively
• Press the UP e and DOWN
temperature
buttons to set the required