Transport Position - Husqvarna 325HE3 Manual De Instrucciones

Transport position

(325HE4)
Once the work has been completed fold the cutting unit
back against the shaft to simplify transport and storage of
the hedge trimmer.
1 Turn off the motor.
2 Loosen the knob on the shaft (clockwise).
3 Grip the handle on the cutting unit and angle the
cutting unit upwards. At an angle of 90 degrees there
is a stop position. To pass the stop position, pull out
the lock button.
4 Fold down the cutting unit against the shaft.
5 Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit
in this position.
1157424-49 Rev.2 2019-11-30
WORKING TECHNIQUES
–
English 17