Manta MES001K Manual De Usuario página 14

CHARGING
Your scooter comes charged out of the carton. We still
recommend charging the unit for 6-8 hours prior to it's first
use. We also recommend charging your scooter after each
use and prior to storage.
WARNING: Do not allow your scooter to go into deep
discharge, as this will damage the batteries.
1. Make sure unit is turned off.
2. Open the charging socket cover located on the left side of
the scooter frame, under the footplate. (Fig. 7)
3. Locate your Battery Charger. (Fig. 6) Find the charger
socket end that has a single-prong socket and plug it into
the scooter.
4. Next, plug the AC plug into a wall outlet.
When first plugged in, the charger will have one red light
that will illuminate, indicating that the charging process has
started. Once the green light on the charger is illuminated,
you may remove the charger and close the safety cap.
RIDING
1. Make sure that all of the exposed bolts and screws are tightened.
2. Raise the kickstand to its upright position.
3. Push the on/off switch on the left side of the scooter frame, under the footplate. (Fig. 7)
to the ON position.
4. Put one foot on the deck of thescooter while pushing off with the other foot, gently
rotate the THROTTLE GRIP, on the right side of the handlebars. The scooter will begin to
move on its own power.
**Your scooter has a variable speed hand throttle. You can control the speed of your scooter
by the amount of pressure you use when rotating the hand throttle. The more you rotate,
the faster you will go.
MES001K – EN
12
Fig. 7
Fig. 8