Operation With The Remote System - Dräger CMS Instrucciones De Uso

Operation
6. Place the pump (4) flush over the Remote
compartment of
carefully press it against the electric
contacts.
7. Screw the pump tight.
3.3 Operation with the Remote
System
1. Follow the Instructions for Use of the
Dräger CMS.
3.3.1 Preparing the sampling hose
Use the original Dräger sampling hose.
1. Insert the adapter (1) correctly into the
gas inlet of the analyzer. Press the
adapter slightly and at the same time turn
it 1/4 turn.
To take measurements above a liquid:
1. Use the float.
2. Pull the two float halves apart.
3. Press the sampling hose into the
appropriate channel of one of the float
halves. The hose must terminate in the
middle of the float, and the hose opening
must be free.
4. Press the float halves together until they
click into place.
CAUTION
!
Avoid crushing the sampling hose!
20
the analyzer and
4
1
Dräger CMS Remote System