Craftmade Swyft Guia De Instalacion página 6

5. Fan Assembly. (cont.)
wood ceiling joist
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
safety cable loop
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on
wood screw
the hanging bracket. Turn the hanging ball slot
and washer
until it lines up with the hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
serious injury or death.
hanging bracket tab
Tip: Seek the help of another person to hold
hanging ball slot
the stepladder in place and to lift the fan up to
you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If
motor housing
necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety
cable should just fit over the threads on the
wood screw. Test safety cable by pulling on loose
end with pliers. If the safety cable slips, the loop
must be adjusted tighter. Extra cable slack can be
left in ceiling area.
page 5