Instructions - NuWave Brio 4.5Q El Manual Del Propietario

INSTRUCTIONS

Getting Started
1. Press ON/OFF once to turn your Brio on.
• 360°F is the default
temperature setting.
2. Press START/PAUSE once to
begin cooking. The LED display
will show 00:15 and time. The (:)
will flash, indicating that the Brio
is now cooking and a 15-minute
countdown has begun. The default
is 360°F for 15 minutes.
3. To interrupt the cooking process, press START/PAUSE or slide
out Fry Pan Basket with Base Tray. The display will show open.
4. To resume cooking, slide the Basket back in. The Brio will
resume cooking.
Wattage Function
The default wattage of the Brio is 1500 watts.
1. To change the wattage, press WATTS once. The blue light will
illuminate above 600, indicating that the Brio is now set to 600 watts.
2. Press WATTS again and the blue light above 900 will illuminate.
The Brio is now set to 900 watts.
3. Press WATTS once more and the blue light above 1500 will
illuminate, indicating that the Brio is now set to the default 1500 watts.
Note: If you change the wattage from the default 1500W to either
600W or 900W and the Brio is unplugged, the unit will remember the
last wattage setting when plugged back in.
Adjusting Temperature
The Brio is set to cook at 360°F by default. To set a different
cooking temperature:
1. Press COOK TEMP. Press - or +
to adjust the temperature lower or
higher. The display will show temp
and the set cooking temperature.
• The temperature will increase
and decrease in 5°F increments.
2. To quickly adjust the temperature in
larger increments, hold down - or +.
• The cooking temperature can be
adjusted at any time during the cooking process.
3. When COOK TEMP is pressed, the display will continue to show
the cooking temperature. To see the remaining or set cooking
time, press COOK TIME.
360F
COOK
TEMP
360F
nuwavenow.com nuwavenow.com
13 13