Movement BOLT Manual De Montagem página 43

CAREFUL!
Before starting to assemble the equipment it is necessary to be alert to the
following:
•Check that the packaging is not damaged and the parts and components of
the equipment are not broken in any way.
•It is recommended that the equipment be unpacked at the place where it will
be assembled.
•The assembly area should be clean.
•The floor should be flat and level to avoid destabilizing the equipment.
•The space around the equipment must be free.
•It is recommended that the equipment be mounted away from moisture and
away from sunlight in order to avoid damaging the electronic parts of the
equipment.
In order to assemble the equipment the following tools are needed:
Assembly by two
people is
recommended.
Thread Lock
Medium torque
Allen n° 8
NOTE: Check the torque table to know how to tighten the screws in a correct way.
ICONS
50% 100%
Do not Do the final
completely tightening
tighten the screws of the screws
TORQUE SPECIFICATION OF SCREW
TIGHTENING TABLE.
Diameter
ADJUSTABLE BENCH PRESS PACKAGING
Linking bar
Support
Chassis
Upholstery for
the seat
Skin card
9
Linking bar
Support
Upholstery
backrest
Support for
weight
Olympic adapter