Tool Use And Care; Specific Safety Rules For Electric Pressure Washers - Surtek HL732 Manual De Usuario Y Garantía

are supervised or trained to operate the product
by a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct
tool for the application. The correct tool will do
the job better and more safely at the rate that it
was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it
out of the reach of children, and do not allow
individuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power
misalignment or binding of moving parts,
broken parts, and any other condition that may
affect the operation of the power tool. If it is
damaged, have it repaired before using. Many
accidents are caused by poorly maintained
power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended
by the manufacturer of your model. Suitable
accessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean.
Cutting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device
suitable, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE: Tool service must be perfomed
only by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
tool. Check for
E N G L I S H •
SPECIFIC SAFETY RULES FOR
ELECTRIC PRESSURE WASHER
WARNING: This appliance has been designed
for use with the cleaning agent supplied or
recommended by the manufacturer. The use
of other cleaning agents or chemicals may
adversely affect the safety of the appliance.
WARNING: High pressure jets can be
dangerous if subject to misuse. The jet must not
be directed at persons, live electrical equipment
or the appliance itself.
- To ensure appliance safety, use only original
spare parts from the manufacturer or approved
by the manufacturer.
- Do not use the appliance if a supply cord or
important parts of the appliance are damaged,
e.g. safety devices, high pressure hoses, trigger
gun.
- If an extension cord is used, the plug and
socket must be of watertight construction.
WARNING: Inadequate extension cords can
be dangerous.
- Remove the plug from the socket-outlet during
cleaning or maintenance and when replacing
arts or converting the machine to another
function. The machine must be attended during
operation.
- The electric supply to this appliance should
include either a residual current device that
will interrupt the supply if the leakage current
to earth exceeds 30mA for 30ms or a device
that will prove the earth circuit. (Only for
recommend).
1. NEVER direct the spray towards any person
or animal.
2. NEVER direct the spray towards electrical
wiring or equipment.
3. NEVER hold your finger over the high pressure
nozzle.
4. NEVER allow children to use this machine.
5. NEVER operate the machine with any of the
covers removed.
6. NEVER at tempt any repairs to this machine
always refer to a qualified service agent.
7. NEVER supply any liquid other than water to
the water inlet.
8. NEVER use the chemical injection facility to
introduce solvents, e.g. paint thinners, petrol,
oil etc.
9. ALWAYS release any residual pressure in the
system by turning off the water supply and
operating the trigger before disconnecting any
hose or accessory.
10. ALWAYS keep the machine itself dry and
well clear of water spray.
U s er 's M an u al
13