Popp McSMOKE RF Instrucciones Para El Uso página 14

INSTALLATION OF McSMOKE RF
The smoke alarm is suitable only for installation on ceilings.
First screw the base plate to the ceiling;
Insert the battery. Check that this is fitted correctly.
Fit the smoke alarm to the base plate (twist).
USE:
TEST:
LED-status indicator
MAINTENANCE:
P O P P G m b H • B a d B e r n e c k • G e r m a n y • w w w. p o p p - e l e k t r o . d e
McSmoke_RF.indd 14 McSmoke_RF.indd 14
Instruction Manual
The smoke alarm is ready to use as soon as the battery is inserted.
Test the smoke alarm by pressing the "Test" button for at least 4 seconds
(until the alarm sounds). It is recommended that the device is tested once a week, to
verify correct functioning. If the alarm does not sound, change the battery.
Reset (3)
Acoustic alarm
The smoke alarm is virtually maintenance-free. You should remove any
deposits of dirt, dust or insects from the smoke alarm, using
a vacuum cleaner or brush, since these can cause false alarms.
McSMOKE RF
LED-status indicator
Test (2)
LED functional indicator
18.10.2004 13:04:43 Uhr 18.10.2004 13:04:43 Uhr