Sofamel D-TUERI PRO Manual De Instrucciones página 22

Placement
The detector can be placed both INSIDE and OUTSIDE,
depending on the characteristics and requirements of the
helmet.
1
Fasten the Dual Lock tape
provided with the detector to
the centre of the helmet, as
shown in the picture, and press
down hard for approximately
20 seconds.
1
Remove the protective film from
the double-sided adhesive.
2
Fasten the detector on the Dual
Lock tape and press until it is
completely secured.
2
Fasten the detector on the Dual
Lock tape and press until it is
completely secured. Press down
hard for approximately 20
seconds.
22