Lovibond Tintometer MD 100 Manual De Instrucciones página 12

Analyses
The following table identifies the output values can be converted into other citation
forms.
Unit
mg/l
mg/l
Chemical Method
DPD / Glycine
Appendix
Interferences
Persistant Interferences
1. All oxidising agents in the samples react like chlorine, which leads to higher results.
2. Concentrations above 6 mg/l Ozone can lead to results within the measuring
range of up to 0 mg/l. In this case, the water sample must be diluted. 10 ml of the
diluted sample should be mixed with the reagent and the measurement taken again
(plausibility test).
Bibliography
Colorimetric Chemical Analytical Methods, 9th Edition, Lovibond
Derived from
DIN 38408-3:2011-04
alternative reagent, used instead of DPD No.1/No.3 in case of turbidity in the water sample caused by high
e)
concentration of calcium and/or high conductivity |
dioxide and ozone in the presence of chlorine |
EN Method Reference Book 1.0
Cite form
O
3
Cl
2
additionally required for determination of bromine, chlorine
f)
including stirring rod, 10 cm
#
Ozone T / M300
Scale Factor
1
1.4771049
EN
13