Lic Mensajes De Inicio - ADIC SNC 4000 Manual Del Usuario

LIC Mensajes de inicio

Después de que BootLoader encuentre y descargue LIC, BootLoader transferirá las operaciones de control
y arranque del SNC 4000. Vea el código de ejemplo a continuación.
Host Name: bootHost
User: buckhorn
Attached TCP/IP interface to ibmEmac unit 0
Attaching network interface lo0... done.
NFS client support not included.
Adding 8123 symbols for standalone.
SDRAM DIMM: 128 Meg - 1 banks detected
Enabling MMU Data Translation
Firmware-4
Version 0401.5 Built Feb 1 2001, 17:23:51 on redsky for Buckhorn - IBM
PowerPC 405GP Rev. D
Product Type - ADIC
Copyright ADIC, 1994-2001
VxWorks 5.4 WIND version 2.5BSP 1.2/4a
Copyright Wind River Systems, Inc., 1984-2000
Memory Size: 0x2000000
/nvfs/ - disk check in progress ...
/nvfs/ - Volume is OK
total # of clusters: 1,008
# of free clusters: 935
# of bad clusters: 0
total free space: 478,720
max contiguous free space: 478,720 bytes
# of files: 5
# of folders: 10
total bytes in files: 29,785
# of lost chains: 0
total bytes in lost chains: 0
Executing startup script /ffs/sna.rc ...
#! /bin/csh -f
CNFinit
value = 0 = 0x0
csSrvcInit
SN600030
Clock set from RTC
value = 0 = 0x0
amemInit
SDRAM DIMM: 128 Meg - 1 banks detected
value = 0 = 0x0
appInit
162
FCR2
Referencia del mensaje de arranque