Technical Data - OHAUS SD Serie Manual Del Usuario

SD Series Bench Scales
3. With a mass on the platform or container, a short press of UNITS Cal will start the
averaging countdown from 5 seconds.
4. The averaged weight is then displayed. The indicator • stops flashing when the
process is complete.
5. The display will hold until a button is pressed.
6. To repeat the process, press UNITS Cal with a mass on the platform or container.
7. To Exit, remove the mass from the platform or container and press UNITS Cal.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

5.TECHNICAL DATA

Specifications:
Model
Capacity x Readability
Battery power requirements
AC Adapter
Model
Capacity x Readability
Battery power requirements
AC Adapter
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
.
SD35
35 kg x 0.02
77 lb x 0.05
SD75L
75 kg x 0.05
165 lb x 0.1
SD75
75 kg x 0.05
165 lb x 0.1
3 "C" Alkaline batteries (LR14)
9-12 Volt DC, 100mA
3 "C" Alkaline batteries (LR14)
9-12 Volt DC, 100mA
EN-3
SD200
200 kg x 0.1
440 lb x 0.2
SD200L
200 kg x 0.1
440 lb x 0.2